Retail Gondolas / Island Units

 

Twinslot high gondola for clothingHigh Double sided gondola unit

Retail Gondolas / Island Units

Make use of all of your available retail space with retail gondola units from Dragon and maybe mix with our merchandising units to provide a varied and attractive shop-floor display. They can be made up with accessories to suit exactly what you want because you know best what you want to achieve. They are strong, go together easily and really look good.

Our gondolas, or ‘island units’ are made to match our Slimpost wall posts, so can easily be combined with our Twinslot (System1) to provide a sleek and stylish retail display system. It also means that they can be used with a wide variety of accessories, so it fits your individual needs. Or, if you are using our square or rectangular post on your wall system, we also make them to order in the same section to match.

Design Your Own Gondola Unit

Our gondola units are designed with the retailer in mind. We understand that not everyone’s retail space is the same, and you know best what you want to achieve, which is why we have 3 different lengths and 2 different heights so you can make the most of the space available.

Use the basic frame as a starter, and then add whatever hanging, shelving, or other display formats you need. Glass or wooden tops, baseboards and centre panels, plus various end accessories are all available as options. Standard finish is a light silver-grey, but for a little extra we can make them in other finishes.

Dimensions

The basic unit consists of 2 legs (or “uprights”) and a set of 2 connectors, and you can extend the length of your display by adding units. The unit has a nominal height of 1.4m, or 1.6m (made to order) and is extendible to 2m or 2.3m with the height extensions. Connectors are available for 1m, 1.2m or 0.6m module lengths. The width is 0.75m without base-boards, or 0.84m with.

Are you a Retail Multiple, Wholesaler or Retail Designer looking for a slightly different design? We make bespoke gondolas and merchandising units too. And why not look at our exhibition stands for more information about single sided and other free-standing retail units?

Use the Contact page to ask for a catalogue and/or let us know what you are looking for, or e-mail or telephone: as above

Double sided Gondola Unit Double sided unit: consisting of 2 CA574 Uprights + 1 set of 2 CA576 Connectors. In standard height of 1.4m, plus 1.6m, 2m and 2.3m.
Single Sided Unit Consisting of 2 CA578 Uprights + 1 set of 2 CA576 Connectors. In standard height of 1.4m, plus 1.6m, 2m and 2.3m.
Double Sided Unit with height extension Consisting of 2 CA574 Uprights + 1 set of 2 CA576 Connectors + 2 CA575 ht extensions. Also for Single sided units.
A row of 4 units: Consisting here of 5 CA574 Uprights + 4 sets of 2 CA576 Connectors
Typical Gondola Assembly (without side hanging or shelving)
CA401 Gondola end mesh panel 500x1200mm. Takes hooks etc.
CA531: Tie bar for gondola end: takes (e.g.) arms CA531/EXT: Extended Tie-bar enables 3 hangers along each side of a 1200 unit; CA535: curved T-bar, takes hangers directly
CA591 Glass top shelf, 350 wide
CA592 Graphic panel holder, takes card or 3mm foamex panels
CA593 Gondola Centre Panel, std: mf mfc black or white
CA59 XXX Mesh centre panel: single or double; take fittings shown under Mesh Panels & Fittings.
CA594 Double sided Slatwall  made to order only
CA596 Base board for double sided unit: std: black or white. Can also be made to fit single sided units: CA and for a continuous run: CA566.
Plan view of CA596 base board
Gondolas can also be made in 60 x 30 uprights to match the CA612 Posts