Twin Slot Legs:
Just our term for a upright with a welded bottom horizontal foot, in a single-sided version they are used where you cannot fix to the walls or for exhibition use: see Exhibitions and pop-up shops In the double-sided version, they are also called ‘gondola legs’.
Typical Assemblies:
For Option 1: Forward Hanging:
For Option 2: Rear Hanging:
For Option 3: Deep Rear Hanging:
For Option 4: Side and Face hanging:
Timber Panels:
Shop-fitters and interior contractors can fit their 18mm thick melamine faced chipboard or medium density fibreboard panels to our 60×30 uprights, as shown here, fitting between the posts.
We don’t normally supply wood panels, but the panel tie-bars are made to suit standard 18mm thick panels and can be supplied such that the panels can be fitted such that either the front or rear face of the panel comes flush with the face of the post.
For 60x30 posts: (or legs)
CA612 60×30 slotted post
Fixed to the wall with CA508s, or CA507’s
CA606 /1200, /1000, /600 Panel tie-bar,
1200ctrs or 1m, or 600mm ctrs of upright.
Normally we’d recommend 3 in the height.
P22C Saddle bracket
2 to a Panel tie-bar: Screw to the rear of the wood panels and simply hang on the panel tie-bars
To place the FRONT of the 18mm panel flush with the front of the upright use the
CA606/FF Panel tie-bar
To place the REAR of the 18mm panel flush with the front of the upright use the
CA606/RF Panel tie-bar
Similarly, with welded Legs, CA678, use the same panel tie-bars and P22C saddle brackets:
A base shelf can either be made as a continuous shelf over several bays, or we can provide fixing pins for placing individual shelves between the legs as here:
Metal Panels:
We also make metal panels to fit 60×30 rectangular posts:
This as an Assembly showing 2 bays of 60×30 posts with metal panels attached.
The posts would need fixing to the wall with fixings e.g. CA508 or CA507/50 (not show here).
The height of the post is 2246mm, plus 24mm for the adjustable foot, making the total height 2270mm with the foot screwed right up.
CA612/WS (60×30) post
CA676/LW Connectors: 3 required per bay:
The connectors are used to space the post correctly, so the panels just slot in, from the
bottom up.
Then you can add whatever hanging / shelving accessories you need into the slotted posts.
CA100 Set of 4 steel panels:
Normally made to order only: to fit 1200mm and 600mm
bays (other bay-widths, including 1000mm also possible)
